SK-2520 U3.1

SuperSpeed USB 10Gbps (USB 3.1 Gen 2)

Quick Overview

  • มีตัวควบคุม hardware RAID ในตัว (Non-RAID, RAID 0, RAID 1, SPAN)
  • USB 3.1 Gen 2 อัตราการถ่ายโอนข้อมูลถึง 10 Gbps
  • รองรับ UASP
  • USB power delivery จ่ายไฟได้สูงสุด 15W ให้กับแลปท๊อป
  • จ่ายไฟแบบ Bus poweredเมื่อไม่ได้เชื่อมต่อกับพาวเวอร์ซัพพลาย
  • ออกแบบมาสำหรับไดรฟ์ขนาด 2.5 นิ้วหน้าถึง 15 mm
  • usb แบบ type c
  • วัสดุทำจากอลูมิเนียม
  • รับประกันสองปีโดยบริษัทแบคเอ็นจำกัด
  • Price
    ฿5,500.00

    Availability: Out of stock

    SuperSpeed USB 10Gbps (USB 3.1 Gen 2)

    By incorporating the latest SuperSpeed USB 10Gbps (USB 3.1 Gen 2) technology, the SK-2520 U3.1 is able to deliver up to twice the speed of the USB 3.1 Gen 1 interface which runs at only 5Gbps. At the same time, with a corresponding USB-C to USB adapter cable, the device is still backwards compatible with the widely used USB 3.0 and USB 2.0 technology.

    2501 U3.1

    Reversible USB Type-C™ Connector with USB Power Delivery (PD)

    The reversible USB Type-C (USB-C) connector enhances ease of use for connecting USB devices with a focus on minimizing user confusion for plug and cable orientation. When the external power adapter is plugged into the device the SK-2520 U3.1 supports power delivery (PD) over USB-C, providing 15W of power to laptops like the MacBook Pro (late 2016) that support charging from a 5V/3A power source. This allows you to work with the external drive without the battery levels of your laptop dropping even when the laptop is not plugged into any other power source.

    2501 U3.1

    USB Bus Power

    This portable and compact USB drive can run on bus power alone without the need for an extra power adapter if the host computer provides sufficient bus power and the drive's power consumption stays below 7W per drive. An external power adapter is included if bus power is insufficient.

    2501 U3.1

    Hardware RAID Controller

    With the built-in hardware RAID controller you can mirror the drives with RAID 1 as a reliable backup for your important data, stripe the drives with RAID 0 for optimal performance and maximum transfer rates or you can select SPAN to combine the drives for large storage capacities. Even individually with Non-RAID, the SATA 6Gb/s interface allows each drive to run at full SATA-III speeds.

    2501 U3.1

    Benchmark

    Results will vary depending on the test environment and the drives but for the best performance, install one or two SATA 6Gb/s SSDs and connect the device to a computer that supports USB 3.1 Gen 2 at 10Gbps.

    When connected to a computer that supports only USB 3.1 Gen 1 at 5Gbps or USB 3.0, the speed is limited by the interface to around 400 MB/s. For traditional spinning hard disk drives (HDDs), the transfer rate is limited by the drive to around 100 MB/s.

    2501 U3.1

    Model No. SK-2520 U3.1
    Certifications
  • CE
  • FCC
  • VCCI
  • BSMI
  • Warranty
    • 2-year limited warranty
    Case material
  • High quality aluminum for optimized heat dissipation
  • Application
  • Up to two 2.5" SATA 6Gb/s SSDs or HDDs
  • Height 7mm - 15mm
  • Height 7mm - 15mm
  • RAID mode
  • Non-RAID
  • RAID 0 striping
  • RAID 1 mirroring
  • SPAN
  • Interface/Ports 1x USB-C port supporting USB 3.1 Gen 2 and power delivery (5V/3A only)
    Data transfer
  • USB 3.1 Gen 2 up to 10Gbps
  • USB 3.1 Gen 1 up to 5Gbps
  • System requirements (PC)
  • Windows 7 or above
  • Computer with USB Type-C connector or otherwise a USB-C to USB Type-A adapter cable is required (not included)
  • System requirements (Mac)
  • mac OS 10.12.4 or above
  • Computer with USB Type-C connector or otherwise a USB-C to USB Type-A adapter cable is required (not included)
  • System environment
  • Operating Temperature: 5°C ~ 35°C
  • Storage Temperature: -20°C ~ 60°C
  • Relative Humidity: 5% ~ 95% (non-condensing)
  • Power supply
  • USB bus power 5V/3A (host computer has to provide sufficient USB bus power)
  • External power supply (UL, cUL, CE, TUV approved)
  • Input: AC 100-240V, 50-60Hz
  • Output: DC +12V/3A
  • Fan noise level N/A
    Dimensions (LxWxH)
  • 18.5 inches x 6 inches x 0.85 inches
  • 15.5cm x 15.2cm x 2.2cm
  • Package contents
  • SK-2520 U3.1
  • USB-C to USB-C cable (1 m)
  • Power adapter
  • User manual